R&D

EDVAN closely follows emerging technologies and combines its engineering expertise with advanced analysis and simulation methods to develop more efficient, reliable, and high-performance systems.

EDVAN focuses its R&D activities on enhancing product performance, improving energy efficiency, and validating system behavior under various operating conditions as key engineering objectives.

In the development of new products and improvement of existing designs, EDVAN utilizes advanced engineering methods such as CFD, FEA, FSI, and modal analysis. Fan aerodynamic performance, structural strength, vibration characteristics, and critical operating conditions are analyzed to optimize designs. Engineering calculations are supported by testing and validation studies to develop project-specific, reliable, and high-performance solutions.

Our R&D Developments
  • Using Computational Fluid Dynamics (CFD) simulations, three-dimensional velocity and pressure distributions within fan housings, rotor geometries, and dust collection filter units are analyzed in detail. During the design stage, aerodynamic losses in fans are minimized, while uniform airflow distribution within filter units is achieved to reduce pressure drops and energy consumption.
  • Using the Discrete Phase Model (DPM), the trajectories of solid particles within the gas flow are simulated inside fan and filter housings. Areas susceptible to particle-induced wear are identified, enabling the development of protective solutions. In filter units, dust inlet distribution, cyclonic pre-separation efficiency, and particle flow toward bag or cartridge filter surfaces are optimized.
  • Using the Finite Element Analysis (FEA) method, rotors, shafts, housings, and dust collection filter enclosures are evaluated under high rotational speeds, static and dynamic pressure differentials, thermal expansion, and explosion/vacuum loads. Von Mises stress and deformation distributions are verified to ensure structural strength limits and operational safety factors.
  • Through FSI analyses, where Computational Fluid Dynamics (CFD) and structural mechanics (FEA) are coupled, dynamic deflections and deformations of fan blades caused by aerodynamic forces are evaluated. This enables the instantaneous effects of aerodynamic loads on structural stability to be accurately assessed and controlled.
  • The natural frequencies and mode shapes of the rotor and supporting structure are calculated to identify potential resonance risks. Safe frequency ranges between the fan’s operating speed range and critical speeds are optimized using Campbell diagram analysis, helping prevent vibration-induced failures.